Correct Answer:

supervlan
Explanation:
1. Understanding VLAN Aggregation in Huawei Switches
* VLAN aggregation is a technique that groups multiple VLANs (sub-VLANs) under a single Super- VLAN .
* Super-VLANs do not have member interfaces but include multiple Sub-VLANs that share a common gateway (VLANIF interface).
2. Inter-Sub-VLAN Communication Requirement
* By default, hosts in different sub-VLANs cannot communicate directly.
* To enable communication between different sub-VLANs within the same Super-VLAN , an inter- sub-VLAN proxy must be enabled .
* This is done using the inter-sub-vlan-proxy enable command in the VLANIF interface of the Super- VLAN.
3. Correct Command Usage
* The command format is:
shell
CopyEdit
supervlan inter-sub-vlan-proxy enable
* This command must be executed under VLANIF 10 , corresponding to the Super-VLAN.
4. Why is the Answer " supervlan " ?
* The missing parameter in the command should be supervlan , because it is used to enable communication between Sub-VLANs under a Super-VLAN .
* This is a specific Huawei command used in HCIP-Datacom-Advanced Routing & Switching Technology certification.

Correct Answer:

Explanation:

In a hub-and-spoke VPN topology :
* Spoke sites should be able to communicate only with the hub , not directly with each other.
* This is achieved through RT (Route Target) control:
* Spokes export routes with ERT = 200:1
* Hub imports those routes with IRT = 200:1
* Hub exports routes with ERT = 100:1
* Spokes import those hub routes using IRT = 100:1
This results in:
* Spokes receive hub routes , but
* Spokes do not receive each other ' s routes , preventing direct spoke-to-spoke communication.
Official Huawei Extract:
" In a hub-spoke topology, spokes use one RT to export (e.g., 200:1), and the hub uses that as its import RT. The hub exports routes with a different RT (e.g., 100:1), and spokes import that RT. This enforces centralized traffic control through the hub. "
- [Huawei HCIA-Datacom Certification Guide - MPLS VPN and Route Target Control]

Correct Answer: C  🗳️

Explanation: Only visible for DumpsReview members. You can sign-up / login (it's free).

Correct Answer: A  🗳️

Explanation: Only visible for DumpsReview members. You can sign-up / login (it's free).

Correct Answer:

Explanation:
Network cable # Use a tester to check connectivity.
Device version file # Check the size of the software package and check whether the file matches the device model.
Board # Install the board on a device that is not connected to the network and observe the running status of the device.
License # Check whether the license is in the validity period to prevent device functions from being affected.
Migration personnel list # Check whether responsibilities and permissions are clearly assigned.
Comprehensive and Detailed In-Depth Explanation:
1. Network Cable - Connectivity Testing:
* Before starting a migration project, all network cables should be tested for physical connectivity issues
.
* Network testers can be used to detect any breaks, shorts, or incorrect wiring.
* Ensuring proper connectivity avoids delays and troubleshooting issues during the migration.
2. Device Version File - Software Compatibility Check:
* Firmware and software versions must be verified before upgrading or migrating network devices.
* The device version file should match the model and hardware specifications to avoid compatibility issues.
* If incorrect software is used, the device may not function properly or could become inoperable.
3. Board - Installation and Hardware Verification:
* Before installing new hardware modules (boards, line cards, etc.) into a production environment, they should be tested in isolation .
* Testing ensures the board is operational and does not introduce faults into the system.
* If a board is faulty, it can cause device failure or unexpected behavior in the migration.
4. License - Validity and Activation Check:
* Some network devices require licenses for full functionality (e.g., advanced routing, security features).
* If a license is expired or missing, critical functions may be disabled after migration.
* Checking license status in advance prevents unexpected downtime or service disruptions.
5. Migration Personnel List - Roles and Responsibilities Assignment:
* Large network migrations require clear responsibility assignments for each team member.
* A migration personnel list ensures that everyone knows their role, tasks, and permissions .
* Proper coordination avoids miscommunication, errors, and project delays.
Key Takeaways:
# Network cables should be tested for connectivity.
# Software versions should match the hardware model to prevent incompatibility.
# Hardware boards should be tested before installing into production.
# Licenses should be verified to prevent service disruptions.
# Migration personnel roles should be clearly defined for smooth execution.
HCIP-Datacom-Advanced Routing & Switching Technology References:
* Huawei HCIP-Datacom Official Certification Guide , Chapter on Network Migration Best Practices .
* Huawei Enterprise Networking Whitepapers , Guidelines on Software & Hardware Pre-checks for Migration .
* Huawei Technical Documentation , License Management in Huawei Datacom Devices .