[Apr 07, 2024] Valid H19-424_V1.0 Test Answers & H19-424_V1.0 Exam PDF
Valid HCSP Presales H19-424_V1.0 Dumps Ensure Your Passing
NEW QUESTION # 37
In the southbound protocol of the controller, the () protocol collects topology information in real time?
- A. BGP-LS
- B. Telemetry
- C. Netconf
- D. PCEP
Answer: A
NEW QUESTION # 38
The opcode parameter description in SRv6 basic data plan is incorrect ()
- A. The SRv6SID format is Locator:Function:Args, where the Args field is also called Opcode
- B. end-op, and end-m need to be statically configured
- C. end, end-x, end-dt4, end-dt6, and end-dx2 can be dynamically assigned or statically configured
- D. The static Opcode needs to be configured within the static segment range to prevent conflicts with the Opcode dynamically allocated by the IGP protocol. The static segment length range is determined by the static static-length parameter of the locator command.
Answer: A
NEW QUESTION # 39
In the virtualization scenario of large and medium-sized campuses, the border node is used for the interconnection between the fabric network and the external network and data forwarding
- A. L2 shared exit
- B. L2 exclusive export
- C. L3 exclusive export
- D. L3 shared exit
Answer: B
NEW QUESTION # 40
Regarding the principle of VN division, the following statement is wrong
- A. Independent business units can be used as a separate virtual network
- B. Virtual networks are isolated from each other by default
- C. In a virtualized network, different service networks can be distinguished by different VNs
- D. The isolation requirements caused by the difference of user identities in the same department can be realized by dividing different virtual networks
Answer: D
NEW QUESTION # 41
The statement about the cloud migration characteristics of campus services is incorrect
- A. Policy execution points and authentication points can be deployed on different physical devices.
- B. Authentication & Portal service, which supports authentication, authorization, and accounting capabilities as an AAA server, is integrated in AC3.0 and AC1.0 is optional, in which billing depends on a third party
- C. Policy service, which provides the ability to configure policies, mainly configures access policies between security groups and security groups, integrates AC3.0, and AC1.0 is optional
- D. The P-Group synchronization service, as the control plane of the IP-Group, provides the collection and distribution of IP and security group correspondence, and is integrated in AC3.0 and AC1.0
Answer: D
NEW QUESTION # 42
The source of policy generation does not include ()
- A. BGP
- B. CLI/Netconf/yang
- C. IGP
- D. PCEP
Answer: C
NEW QUESTION # 43
If the device suddenly goes offline during the configuration delivery process, what error message may be displayed in the configuration result?
- A. Configuration service exception. Contact maintenance engineerenetconf communication failed
- B. The service is abormal
- C. Service process faied
- D. Unrecongnizeinformation
Answer: A
NEW QUESTION # 44
In the WLAN Planner tool, under what circumstances will it not prompt whether to enter roaming mode when walking on the 3D floor
- A. The number of APs is greater than 50 or equal to 0
- B. The number of APs is greater than 100 or equal to 0
- C. In the case of insulating obstacles
- D. When the signal strength in the floor is too low
Answer: C
NEW QUESTION # 45
iMaster NCE-Campus is deployed in a virtualized environment based on Taishan's physical server, and the corresponding virtualization software is:
- A. Fusionlnsight
- B. FusionCompute8.0
- C. VNWare vSphere
- D. FusionCompute6.5.1
Answer: B
NEW QUESTION # 46
In the network plan of iMaster NCE-Campus, what is the recommended networking mode if there is no special isolation requirement??
- A. Four-plane networking
- B. Three-plane networking
- C. Two-plane networking
Answer: C
NEW QUESTION # 47
When doing BGP design in SDN-WAN, it is recommended to divide devices with the same configuration into the same group to simplify configuration and maintenance.
- A. 1 GROUP OF PE (BR-PE) in all branches
- B. 1 group for all RR devices (RR).
- C. All backbones P(P) 1 group
- D. 1 GROUP OF PE (DC-PE) for all data centers
Answer: C
NEW QUESTION # 48
The following common obstacle signals have the least attenuation ()
- A. Brick wall (120mm)
- B. Wooden door (40mm)
- C. Metal (80mm)
- D. Bulletproof glass (120mm)
Answer: B
NEW QUESTION # 49
In the V200R022 version of the S switch, the description of the S5X31(S)-S multi-rate switch is wrong ()
- A. It supports advanced features such as VxLAN and MPLS, real-time telemetry data collection, and network O&M visualization, which can be widely used in scenarios such as medium-sized campus aggregation and small campus cores.
- B. It can be used as a remote module for the central switch to achieve simplified networking.
- C. Support 2G large cache to cope with high burst business traffic.
- D. 3 power supply design, support N+1 redundancy, full 802.3bt90W PoE++ power supply for all ports, and the maximum PoE output power of the whole machine can reach 2268W, adapting to the power supply needs of massive terminals.
Answer: C
NEW QUESTION # 50
The types of cloud devices that the cloud management solution supports management do not include?
- A. AR router
- B. S switches
- C. FW
- D. AP
- E. CE switches
Answer: E
NEW QUESTION # 51
Regarding the description of the design principles of Locator SID, it is incorrect ()
- A. For the Locator CIDR block planning of SRv6, the appropriate mask should be set according to the number of IPv6 SIDs that may be used by the device.
- B. Devices at the same site belong to the same large network segment with the same prefix, and different devices are assigned to the small network segment with the same prefix in the large network segment.
- C. loatos svV6_locator ipu6-prelix21.DB8ABCD: .b4 static 32, Locator is 2001.DB8.ABCD:, length 64 bits, static segment occupies 32 bits, dynamic segment occupies 32 bits args field occupies O bits. The starting value of the state segment is: 2001:DB8:ABCD:0000:0000:0000:C
- D. Locator SID supports static configuration or dynamic allocation, end-op and end-m must be statically configured, and static configuration is also recommended for end and end.x, which is convenient for network O&M. Other SIDs can be assigned dynamically.
Answer: C
NEW QUESTION # 52
The description of the intelligent routing strategy of the LAN &WAN convergence solution is incorrect
- A. Support setting the active/standby link based on the application/application group, andintelligently select the link for data forwarding
- B. LTE can only be used as an escape link
- C. The link intelligent handover conditions include packet loss, delay, and jitter
- D. Support bandwidth conditional traffic selection
Answer: B
NEW QUESTION # 53
In NCE-IP deployment, which of the following licenses can be optionally loaded ()
- A. Load the NCE license
- B. Load the FI license
- C. Load the FC license (virtual machine) license
Answer: B
NEW QUESTION # 54
The description of the dual-border and WAC interconnection design of the campus distributed gateway is incorrect ()
- A. During wireless centralized forwarding, the WAC and the border need to manage IP communication and service VLAN communication, that is, the underlay and overlay need to be connected.
- B. During wireless local forwarding, only the management IP address needs to be communicated between the WAC and the border, that is, the underlay is connected.
- C. Supported networking: WAC dual-node hot standby (VRRP dual-node hot standby or dual-link hot standby), and dual-border port sub-networking, recommended dual-node VRRP hot standby: In multi-campus interconnection LAN-WAN convergence scenarios, refer to the following topology
- D. In the overlay interconnection solution, it is recommended to run the VRRP VRRP virtual address between the two borders as the gateway for wireless users
Answer: D
NEW QUESTION # 55
Campus virtualization solution, the networking topology that is not supported by underlay routing automation is ()
- A. Convergence ring networking
- B. Core transparent transmission ring networking
- C. Tree networking
- D. Access to ring networking
Answer: D
NEW QUESTION # 56
What is the detection technology used for TEHSB and VPNFRR protection solutions in the SDN-WAN solution?
- A. Ethoam
- B. Y1731
- C. BFD
- D. NQA
Answer: C
NEW QUESTION # 57
......
H19-424_V1.0 Dumps Real Exam Questions Test Engine Dumps Training: https://www.dumpsreview.com/H19-424_V1.0-exam-dumps-review.html
