Download Cisco 350-401 Mock Test Study Material
350-401 Questions Prepare with Learning Information
Get to know about the Requirements of the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam:
No prerequisite are needed for the Cisco 350-401 Exam. Minute details can be found on Cisco.com. I recommend that candidates should start preparing for the Cisco 350-401 Exam by taking a hard look at Cisco's Official Curriculum. The Cisco Learning Network has other course materials that are very helpful. Still, it is recommended that candidates should refer to the Cisco Documentation Center for the latest technical information on Cisco devices. Check the Cisco Learning Network regularly for updates or changes to this curriculum.
NEW QUESTION # 66
Refer to the Exhibit.
Running the script causes the output in the exhibit. What should be the first line of the script?
- A. ncclient manager import
- B. from ncclient import manager
- C. from ncclient import *
- D. import manager
Answer: C
NEW QUESTION # 67
Drag and drop the snippets onto the blanks within the code to construct a script that shows all logging that occurred on the appliance from Sunday until 9:00 p.m Thursday Not all options are used.
Answer:
Explanation:
NEW QUESTION # 68 
Refer to the exhibit. An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and a HTTP response code of 400. What do these responses tell the engineer?
- A. JSON body was used
- B. The Accept header sent was application/xml
- C. POST was used instead of PUT to update
- D. The Content-Type header sent was application/xml.
Answer: B
Explanation:
Explanation
Accept and Content-type are both headers sent from a client (a browser) to a service. Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being sent from the client to the server.
The response was sent in XML so we can say the Accept header sent was application/xml.
NEW QUESTION # 69
Refer to the exhibit.
Which IPv6 OSPF network type is applied to interface Fa0/0 of R2
by default?
- A. multipoint
- B. Ethernet
- C. broadcast
- D. point-to-point
Answer: C
Explanation:
Explanation
The Broadcast network type is the default for an OSPF enabled ethernet interface (while Point-to- Point is the default OSPF network type for Serial interface with HDLC and PPP encapsulation).
NEW QUESTION # 70
Which configuration restricts the amount of SSH that a router accepts 100 kbps?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
CoPP protects the route processor on network devices by treating route processor
resources as a separate entity with its own ingress interface (and in some
implementations, egress also). CoPP is used to police traffic that is destined to the
route processor of the router such as:
+ routing protocols like OSPF, EIGRP, or BGP.
+ Gateway redundancy protocols like HSRP, VRRP, or GLBP.
+ Network management protocols like telnet, SSH, SNMP, or RADIUS.
Therefore we must apply the CoPP to deal with SSH because it is in the
management plane. CoPP must be put under "control-plane" command.
NEW QUESTION # 71
A client with IP address 209 16b 201 2b must access a web server on port 80 at 209 I6b.200.22b. To allow this traffic. an engineer must add a statement to an access control list that is applied in the inbound direction on the port connecting to the web server Which statement allows this traffic?
- A. permit tcp host 209.165.200.225 eq 80 host 209.165.201.25
- B. permit tcp host 209.165.200.225 host 209.165.201.25 eq 80
- C. permit tcp host 209.165.200.225 lt 80 host 209.165.201.25
- D. permit tcp host 209.165.201.25 host 209.165.200.225 eq 80
Answer: A
NEW QUESTION # 72
Drag and drop the characteristics from the left onto the infrastructure deployment models they describe on the right.
Answer:
Explanation:
.
NEW QUESTION # 73
Refer to the exhibit.
Which command must be applied to R2 for an OSPF neighborship to form?
- A. network 20.1.1.2.0.0.255.255 area 0
- B. network 20.1.1.2 255.255.0.0. area 0
- C. network 20.1.1.2.0.0.0.0 area 0
- D. network 20.1.1.2 255.255.255 area 0
Answer: C
Explanation:
Reference:
The -network 20.0.0.0 0.0.0.255 area 0|| command on R2 did not cover the IP address of Fa1/1 interface of R2 so OSPF did not run on this interface. Therefore we have to use the command -network 20.1.1.2 0.0.255.255 area 0|| to turn on OSPF on this interface.
Note: The command -network 20.1.1.2 0.0.255.255 area 0|| can be used too so this answer is also correct but answer C is the best answer here.
The -network 0.0.0.0 255.255.255.255 area 0|| command on R1 will run OSPF on all active
NEW QUESTION # 74 
Refer to the exhibit. An engineer configures a new HSRP group. While reviewing the HSRP status, the engineer sees the logging message generated on R2. Which is the cause of the message?
- A. The HSRP configuration has caused a routing loop
- B. The same virtual IP address has been configured for two HSRP groups
- C. A PC is on the network using the IP address 10.10.1.1
- D. The HSRP configuration has caused a spanning-tree loop
Answer: B
NEW QUESTION # 75
Which access point mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?
- A. sniffer mode
- B. sensor mode
- C. client mode
- D. SE-connect mode
Answer: B
Explanation:
As these wireless networks grow especially in remote facilities where IT professionals may not always be onsite, it becomes even more important to be able to quickly identify and resolve potential connectivity issuesideally before the users complain or notice connectivity degradation. To address these issues we have created Cisco's Wireless Service Assurance and a new AP mode called "sensor"mode. Cisco's Wireless Service Assurance platform has three components, namely, Wireless PerformanceAnalytics, Real-time Client Troubleshooting, and Proactive Health Assessment. Using a supported AP ordedicated sensor the device can actually function much like a WLAN client would associating andidentifying client connectivity issues within the network in real time without requiring an IT or technician to beon site.
Reference:
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/dam/en/us/td/docs/wireless/controller/techn
NEW QUESTION # 76
What NTP Stratum level is a server that is connected directly to an authoritative time source?
- A. Stratum 0
- B. Stratum 15
- C. Stratum 14
- D. Stratum 1
Answer: D
Explanation:
Explanation
The stratum levels define the distance from the reference clock. A
reference clock is a stratum 0 device that is assumed to be accurate and has little or no delay associated with it. Stratum 0 servers cannot be used on the network but they are directly connected to computers which then operate as stratum-1 servers. A stratum 1 time server acts as a primary network time standard.
A stratum 2 server is connected to the stratum 1 server; then a stratum 3 server is connected to the stratum 2 server and so on. A stratum 2 server gets its time via NTP packet requests from a stratum 1 server. A stratum 3 server gets its time via NTP packet requests from a stratum-2 server... A stratum server may also peer with other stratum servers at the same level to provide more stable and robust time for all devices in the peer group (for example a stratum 2 server can peer with other stratum 2 servers).
NTP uses the concept of a stratum to describe how many NTP hops away a
machine is from an authoritative time source. A stratum 1 time server
typically has an authoritative time source (such as a radio or atomic clock, or a Global Positioning System (GPS) time source) directly attached, a stratum 2 time server receives its time via NTP from a stratum 1 time server, and so on.
NEW QUESTION # 77
Refer to the exhibit.
Based on the configuration in this WLAN security setting, Which method can a client use to authenticate to the network?
- A. text string
- B. username and password
- C. RADIUS token
- D. certificate
Answer: A
NEW QUESTION # 78
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.
Answer:
Explanation:
Explanation
+ accepts LISP encapsulated map requests: LISP map resolver
+ learns of EID prefix mapping entries from an ETR: LISP map server
+ receives traffic from LISP sites and sends it to non-LISP sites: LISP proxy ETR
+ receives packets from site-facing interfaces: LISP ITR
Explanation
ITR is the function that maps the destination EID to a destination RLOC and then encapsulates the original packet with an additional header that has the source IP address of the ITR RLOC and the destination IP address of the RLOC of an Egress Tunnel Router (ETR).
After the encapsulation, the original packet become a LISP packet.
ETR is the function that receives LISP encapsulated packets, decapsulates them and forwards to its local EIDs. This function also requires EID-to-RLOC mappings so we need to point out an "map-server" IP address and the key (password) for authentication.
A LISP proxy ETR (PETR) implements ETR functions on behalf of non-LISP sites. A PETR is typically used when a LISP site needs to send traffic to non-LISP sites but the LISP site is connected through a service provider that does not accept no routable EIDs as packet sources. PETRs act just like ETRs but for EIDs that send traffic to destinations at non-LISP sites.
Map Server (MS) processes the registration of authentication keys and EID-to-RLOC mappings. ETRs sends periodic Map-Register messages to all its configured Map Servers.
Map Resolver (MR): a LISP component which accepts LISP Encapsulated Map Requests, typically from an ITR, quickly determines whether or not the destination IP address is part of the EID namespace
NEW QUESTION # 79
Refer to the exhibit.
Which IP address becomes the active next hop for 192.168.102 0/24 when 192.168.101.2 fails?
- A. 192.168.101.18
- B. 192.168.101.10
- C. 192.168.101.14
- D. 192.168.101.6
Answer: A
Explanation:
The '>' shown in the output above indicates that the path with a next hop of 192.168.101.2 is the current best path.
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External > IGP Cost > eBGP Peering > Router ID BGP prefers the path with highest weight but the weights here are all 0 (which indicate all routes that are not originated by the local router) so we need to check the Local Preference. Answer
'192.168.101.18' path without LOCAL_PREF (LocPrf column) means it has the default value of 100.
Therefore we can find the two next best paths with the next hop of 192.168.101.18 and
192.168.101.10.
We have to move to the next path selection attribute: Originate. BGP prefers the path that the local router originated (which is indicated with the "next hop 0.0.0.0"). But none of the two best paths is self-originated.
The AS Path of the next hop 192.168.101.18 is shorter than the AS Path of the next hop
192.168.101.10 then the next hop 192.168.101.18 will be chosen as the next best path.
NEW QUESTION # 80
"HTTP/1.1 204 content" is returned when cur -I -x DELETE command is issued. Which situation has occurred?
- A. The command succeeded in deleting the object
- B. The object could not be located at the URI path
- C. The URI was invalid
- D. The object was located at the URI, but it could not be deleted.
Answer: A
NEW QUESTION # 81
What is a characteristic of Cisco StackWise technology?
- A. lt combines exactly two devices
- B. It is supported on the Cisco 4500 series.
- C. It uses proprietary cabling
- D. It supports devices that are geographically separated
Answer: C
NEW QUESTION # 82
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
Explanation
Diagram Description automatically generated
NEW QUESTION # 83
......
Most Reliable Cisco 350-401 Training Materials: https://www.dumpsreview.com/350-401-exam-dumps-review.html
Practice Material for 350-401 Exam Question Preparation: https://drive.google.com/open?id=19maZa8_8jOZC95QNWsvvepiKtDSq9cUw
