Get SMI300XE Products Practice Material for SMI300XE Exam Question Preparation
Most Reliable Supermicro SMI300XE Training Materials
NEW QUESTION # 12
The AGFHC Tool is intended for use exclusively by specific users. Who are those users? Choose 2 answers.
- A. SMC Partners
- B. VARs / Resellers
- C. Customers
- D. Internal SMC Employees
Answer: B,D
Explanation:
TheAGFHC Toolis specifically designed forSupermicro's internal employeesandauthorized resellers (VARs). These users require access to diagnostic and firmware update tools that are restricted totrained personnel.
* Option A (Correct):Internal Supermicro employeesuse this tool for system maintenance and diagnostics.
* Option D (Correct):VARs (Value-Added Resellers)are authorized to use the tool forcustomer support and system integration.
* Option B (Incorrect):GeneralSMC partners do not have accessto AGFHC.
* Option C (Incorrect):End customers do not have accessto this tool.
NEW QUESTION # 13
What information is shown in the IPMI storage monitoring section?
- A. The motherboard
- B. Overheating issues
- C. Attached storage devices
- D. Severity of health events
Answer: C
Explanation:
TheIPMI storage monitoring sectionprovides information aboutattached storage devices.
* Option A (Incorrect):IPMI doesnot display motherboard detailsin this section.
* Option B (Incorrect):Overheating issuesare logged separatelyin the event logs.
* Option C (Correct):IPMI storage monitoring tracks attached storage devices.
* Option D (Incorrect):Severity of health eventsis found in system logs, not storage monitoring.
NEW QUESTION # 14
Before disconnecting the cables from the NVMe backplane, you should map or take a picture of the cables to ensure they are returned to the same locations. True or False?
- A. False
- B. True
Answer: B
Explanation:
When working withSupermicro MI300X GPU systems, it ishighly recommendedtomap or take a picture of cable connections before disconnection.
Reasons:
* Ensuring Proper Reconnection# NVMe backplanes have multiplecritical connections(MCIO cables, power cables, data lanes, and SAS connections). Misplacing any of these cables could cause:
* Boot failures
* Drive detection issues
* Performance degradation
* Avoiding Errors in Cable Routing# Supermicro documentation states thatimproperly routed cables can obstruct airflow, potentially leading tooverheatingin high-performance systems.
* Easing Future Troubleshooting# If issues arise after reassembly, aphoto or cable mapallows engineers toquickly verifywhether cables werereconnected properly.
This best practice isofficially recommendedinSupermicro's service and installation guidelinesfor NVMe backplanes.
NEW QUESTION # 15
How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?
- A. 0
- B. 1
- C. 2
- D. None
Answer: B
Explanation:
The ROCm softwarerequires at least one GPU to function. It can stilloperate with up to 2 missing GPUs, butif 3 or more GPUs are missing, ROCm commands will fail.
* Option A (Incorrect):ROCmfails if 3 GPUs are missing.
* Option B (Incorrect):The software can function withmore than 1 GPU missing.
* Option C (Correct):ROCmcan still execute commands if only 1 or 2 GPUs are missing.
* Option D (Incorrect):At least 1 GPUmust be detected for ROCm to work.
NEW QUESTION # 16
The ROCm commands are not providing output or are failing. What could be the primary reason why?
And how can you validate the reasoning?
- A. If more than 3 GPUs are missing, then ROCm commands will not function. We need to verify that the 3 are missing in the IPMI GUI and review the GPU component section to make sure that at least 2 or fewer GPUs are missing.
- B. CPU is not installed correctly on the server. Review the OS dmesg logs for any odd CPU messages, then if located proceed to reseat the CPU.
- C. The GPU baseboard may not be detected. You can determine this by opening the IPMI GUI and reviewing the FW section.
- D. You suspect there are GPUs not detected. To determine which GPUs are missing, open the IPMI GUI and review the GPU component section to make sure all GPUs are present.
Answer: D
Explanation:
IfROCm commands fail to provide output, the primary issue is likelymissing or undetected GPUs. The best way to validate this is by checking the IPMI GUI and reviewing the GPU component sectionto ensure that all GPUs are present.
* Option A (Correct):Missing GPUsare the most common causeof ROCm failures. The IPMI GUI provides visibility into which GPUs are detected.
* Option B (Incorrect):CPU misalignment would causegeneral system failure, not ROCm-specific issues.
* Option C (Incorrect):The GPU baseboard status can be checked in IPMI but isnot the primary cause of ROCm failures.
* Option D (Incorrect):ROCm can function with multiple missing GPUs, butthe key issue is confirming GPU presence first.
NEW QUESTION # 17
What is the executable file extension used in Windows for SUM?
- A. .txt
- B. binary
- C. .exe
- D. .sh
Answer: C
Explanation:
This question is a duplicate ofQuestion No. 20. The correctWindows executable file extension for SUM is .
exe.
* Option A (Correct):SUM on Windows is executed using .exe.
* Option B (Incorrect):.sh is a script file format for Linux, not Windows.
* Option C (Incorrect):.txt files contain textand cannot execute commands.
* Option D (Incorrect):"binary" is not a valid file extension for SUM execution on Windows.
NEW QUESTION # 18
In the IPMI Dashboard, how can the health event log help you identify a failure with a component like a fan or power supply?
- A. In IPMI under Configuration, configure a new fan.
- B. The blades will be turning a bright orange.
- C. The purple status indicator in the IPMI Dashboard indicates failures.
- D. The red severity status identifies failed components in the log.
Answer: D
Explanation:
TheIPMI Dashboard health event loghelpsidentify component failuresusing ared severity status indicator
. If a fan or power supply fails, theevent log will mark it as a red alert, allowing users to take corrective action.
* Option A (Correct):Red severity status in theevent logsignals a failed component.
* Option B (Incorrect):Fansdo not change colorswhen failing.
* Option C (Incorrect):There is nopurple status indicatorin IPMI for failures.
* Option D (Incorrect):You cannot configure a new fan inIPMI under Configuration; you must replace a failed fan.
NEW QUESTION # 19
What is the main purpose of the AGFHC software tool?
- A. The AGFHC tool is used for checking support phone numbers and emails for AMD GPU support staff who should be the first point of contact for any issues related to AMD GPUs.
- B. The AGFHC tool is used to diagnose and stress test components on the MI300X. This will help identify and validate component issues.
- C. The AGFHC tool is used to support other platforms such as Mac OS and Windows so they can all share GPU system resources.
- D. The AGFHC tool is used to update firmware and BIOS on the GPU to ensure that it is up to datewith the latest code.
Answer: B
Explanation:
TheAGFHC toolis designed todiagnose and stress test system componentsin theMI300X platform, helping identify faultsin GPUs, CPUs, and system hardware.
* Option A (Correct):AGFHC isused for diagnostics and stress testing.
* Option B (Incorrect):The tool doesnot enable cross-platform GPU resource sharing.
* Option C (Incorrect):While itinteracts with firmware, it doesnot update BIOS.
* Option D (Incorrect):The tool isnot a support contact directory.
NEW QUESTION # 20
Which SUM command is used to verify the AOC NIC installed on the system?
- A. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command getnicinfo
- B. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocnicinfo
- C. sum.exe-read all AOC-from 10.1.1.100
- D. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
Answer: D
Explanation:
Toverify the AOC NIC installedon the system, the correctSUM (Supermicro Update Manager) command is:
css
CopyEdit
sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
* Option B (Correct):This command retrievesAOC NIC information.
* Option A (Incorrect):"getaocnicinfo" isnot a valid command.
* Option C (Incorrect):This syntax isincorrect and will not execute properly.
* Option D (Incorrect):"getnicinfo" retrievesgeneral NIC details, not AOC NIC-specific information.
NEW QUESTION # 21
What information is useful for identifying system issues and their timing?
- A. GPU memory specification
- B. Subnet Mask
- C. Last login attempt
- D. Event log
Answer: D
Explanation:
Theevent logis the primary source of information for identifyingsystem issues and their exact timing. The IPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.
* Option A (Incorrect):GPU memory specifications do not provide issue tracking information.
* Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.
* Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.
* Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.
NEW QUESTION # 22
When removing the GPU tray, where are the two screws located that must be loosened to allow the handles to be pulled out/down?
- A. Top of the GPU tray
- B. One on top and one on bottom of the GPU tray
- C. One on each side of the GPU tray
- D. Bottom of the GPU tray
Answer: C
Explanation:
Toremove the GPU tray, you need toloosen two screwslocatedone on each side of the tray.
* Option B (Correct):There isone screw on each sidethat must beloosenedbefore pulling the handles out
/down.
* Option A (Incorrect):The screwsare not only on the top.
* Option C (Incorrect):The screwsare not only on the bottom.
* Option D (Incorrect):Thereis no screw configurationwithone on top and one on the bottom.
NEW QUESTION # 23
In which directory should the AGFHC tool be installed for it to function properly in Ubuntu?
- A. Directory - /usr/home/customer/AGFHC
- B. Directory - /tmp/amd/AGFHC/files
- C. Directory - /windows/user/desktop
- D. Directory - /opt/AMD/AGFHC
Answer: D
Explanation:
TheAGFHC tool for Ubuntumust be installed in the/opt/AMD/AGFHCdirectory.
* Option A (Incorrect):The/tmp/directory istemporary storageand is not used forapplication installations.
* Option B (Incorrect):/windows/user/desktopis a Windows path and does not apply to Linux-based Ubuntu.
* Option C (Incorrect):/usr/home/customer/AGFHCis not the correct standard directory for system- wide software.
* Option D (Correct):/opt/AMD/AGFHCis the correct directory for installing AMD-related tools in Ubuntu.
NEW QUESTION # 24
When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?
- A. It will be on the label on the bottom side of the system cover.
- B. It will be on the label on the bottom of the system.
- C. Use the system model number as the password.
- D. It will be on the tag next to the I/O Module.
Answer: A
Explanation:
Supermicro ships systems with aunique BMC passwordfor security purposes. Thispassword is printed on a label located on the bottom side of the system cover.
* Option A (on the I/O module tag)is incorrect as the tag typically containsnetwork interface informationrather than credentials.
* Option B (using the system model number as a password)is incorrect because Supermicrodoes not use default passwords based on the model number.
* Option C (on the bottom of the system)is close but not precise;the correct location is the bottom side of the system cover.
* Option D (label on the bottom side of the system cover)is correct, as stated in theSupermicro IPMI and BMC login documentation.
Security Recommendation:Upon first login,Supermicro strongly recommends changing the default BMC password immediatelyfor security reasons.
NEW QUESTION # 25
......
LATEST SMI300XE Exam Practice Material: https://www.dumpsreview.com/SMI300XE-exam-dumps-review.html
The Realest Study Materials SMI300XE Dumps: https://drive.google.com/open?id=1UCKlhqVniE5WGjXkLikYqOXJSBvY_RKq
