
Latest Jan-2022 CompTIA SK0-004 Dumps Updated 778 Questions
PDF Download Free of SK0-004 Valid Practice Test Questions
Domain 4: Security (13%)
This subject area evaluates the applicants’ knowledge and skills in differentiating physical security principles and techniques; implementing server hardening methods depending on a particular scenario; explaining fundamental network security protocols and systems; applying logical access control techniques in compliance with company policy; applying data security techniques as well as secure storage disposal methods; applying appropriate environmental controls & techniques depending on a particular scenario.
NEW QUESTION 111
A technician is experiencing overheating on a rack mounted server. After powering off and removing the cover of the server, a large amount of dust is noticed on one of the fans. After cleaning out the dust and powering the server back on, the server is still overheating. Which of the following would BEST explain this issue?
- A. The power supply has failed.
- B. The server is using excessive power.
- C. Some of the cooling fans are defective.
- D. The hard drives are running too hot.
Answer: C
NEW QUESTION 112
A security incident occurs that requires a systems administrator to take an image of a user's workstation hard drive. Which of the following should be taken at the time the system image is generated and retained through the file of the investigation to assure files have not been modified since?
- A. Copies of the system logs at specific intervals
- B. A checksum hash of the drive image or files
- C. A snapshot of the file system
- D. The user's credentials and permissions
Answer: B
NEW QUESTION 113
A server technician has installed a full rack in a server room and must place the following items in the rack:
One 2U server
One 2U firewall
One 1U server
Two 3U UPS devices
Which of the following describes how the technician should arrange the rack?
- A. Place both 3U UPS devices on the top of the rack
- B. Place one 3U UPS device on the top of the rack and one on the bottom
- C. Place both 3U UPS devices in the center of the rack
- D. Place both 3U UPS devices on the bottom of the rack
Answer: D
NEW QUESTION 114
An administrator is given two hard drives and asked to build a redundant storage solution. Which of the following RAID levels should the administrator use?
- A. RAID 4
- B. RAID 5
- C. RAID 1
- D. RAID 0
Answer: C
NEW QUESTION 115
The ability to maintain data access in the event of the loss of a network link, host, or device is called:
- A. LUN replication
- B. load balancing
- C. NAS balancing
- D. failover clustering
Answer: D
NEW QUESTION 116
Which of the following methods should a technician perform to properly clear a hard drive before disposal?
- A. Delete the partition
- B. Zero all block sectors
- C. Delete the FAT
- D. Zero the NTFS journal
Answer: B
NEW QUESTION 117
Which of the following is used in a server to ensure proper cooling and airflow when components are removed?
- A. Voltage regulator
- B. Heatsink
- C. Baffles
- D. Liquid cooling
Answer: C
NEW QUESTION 118
A number of users are indicating that access to a network file server is responding very slowly when reading or writing to the share. The server administrator notes that a drive has failed in a four-disk RAID 5 array. The array is running in a degraded state because no hot spare was configured. After replacing the failed disk, which of the following steps would be BEST to take to prevent slow response after a drive failure?
- A. Add a drive to the array, but do not configure it as a hot spare.
- B. Add a drive to the array, and configure it as a cold spare.
- C. Add an additional hard drive, and convert the volume to a RAID 10 configuration.
- D. Add an additional hard drive, and convert the volume to a RAID 6 configuration.
Answer: D
NEW QUESTION 119
A technician needs to install six blade servers. Which of the following MUST a technician install along with the blades?
- A. Blade rail kits
- B. Blade shelves
- C. Blade station
- D. Blade enclosure
Answer: D
NEW QUESTION 120
An administrator sees a message in the system console that a drive is bad in the single-volume JBOD storage array. A few minutes later, a user calls the help desk to report an inability to read a file from a mapped drive.
Which of the following should the administrator do?
- A. Replace the failed drive and restore the data from the last backup.
- B. Swap out the failed drive and let the array rebuild.
- C. Allow the array rebuild automatically using the hotspare.
- D. Reseat the failed drive and restore the array using the parity drive.
Answer: A
Explanation:
Explanation
NEW QUESTION 121
A server has been assigned a role of mail server. Which of the following services will be installed as a result of this selection?
- A. TCP
- B. SFTP
- C. SNMP
- D. SMTP
- E. DHCP
Answer: D
NEW QUESTION 122
A technician is tasked by an administrator to patch a virtual machine. The technician needs to ensure that in case of failure, recovery of the virtual machine will be possible. Which of the following recovery principles should the technician employ?
- A. Bare metal
- B. Incremental
- C. Selective
- D. Snapshot
Answer: D
NEW QUESTION 123
An enterprise technician is tasked to implement a disk array that will host continuous disk-to-disk replication.
Which of the following storage types should be selected for maximum performance?
- A. SAS
- B. SCSI
- C. SATA
- D. USB
Answer: A
NEW QUESTION 124
A server administrator is configuring a new server for an organization. The server will function as a firewall and proxy server, as well as provide NAT services for other devices on the network. Which of the following BEST describes how the network hardware on the server should be configured?
- A. The server should have at least two NICs: each NIC should be configured with an IP address on the same network segment.
- B. The server requires at least three NICs: one configured with an IP address for the intranet clients, one with an IP address on the inside network, and one with an IP address on the outside network.
- C. The server requires only one NIC, as the NIC can be configured with two IP addresses: one for the inside network segment, and one for the outside network segment.
- D. The server should have at least two NICs: one configured with an IP address on the inside network, and one with an IP address on the outside network.
Answer: D
NEW QUESTION 125
A technician is experiencing overheating on a rack mounted server. After powering off and removing the cover of the server, a large amount of dust is noticed on one of the fans. After cleaning out the dust and powering the server back on, the server is still overheating. Which of the following would BEST explain this issue?
- A. The power supply has failed.
- B. The server is using excessive power.
- C. Some of the cooling fans are defective.
- D. The hard drives are running too hot.
Answer: C
NEW QUESTION 126
Which of the following file types can Microsoft servers package for remote installation by default?
- A. .dll
- B. .ini
- C. .exe
- D. .msi
Answer: D
NEW QUESTION 127
Server A hosts a mission-critical business application. The server has one disk and one NIC. The administrator has been asked to implement a solution to meet the business requirement that the application must maintain high availability, even in case of a hardware failure. Which of the following BEST meets this requirement?
- A. Add multiple disks on the server and configure RAID 5.
- B. Move the application to another server that has more resources.
- C. Configure failover clustering using Server A and a new server.
- D. Add an additional NIC and configure the NIC as standby.
Answer: C
NEW QUESTION 128
......
SK0-004 Test Engine files, SK0-004 Dumps PDF : https://www.dumpsreview.com/SK0-004-exam-dumps-review.html

