Pass DC0-200 Brain Dump Updated Certification Sample Questions
Online DC0-200 Test Brain Dump Question and Test Engine
NEW QUESTION # 53
Which three pieces of information must you provide when using the Dell Server Assistant to install Windows 2000? (Choose three.)
- A. RAID level and virtual disk size
- B. time, date, and time zone
- C. Dell serial number
- D. hostname
Answer: A,B,D
NEW QUESTION # 54
What should you do to clear NVRAM and force the system to reset its configuration data?
- A. NVRAM cannot be cleared once it has been set by an administrator.
- B. in the System Setup utility, activate the Num Lock, Caps Lock, and Scroll Lock lights on the keyboard, then press Alt-E
- C. boot to the Dell Server Assistant CD first
- D. press F10 when prompted at startup
Answer: B
NEW QUESTION # 55
You are about to begin the installation of Windows 2000 Server on your PowerEdge server . As you inspect the System Setup Utility, you notice that the Asset Tag field is blank. What are two ways you can add the correct asset tag into the BIOS? (Choose two.)
- A. Flashing the ESM to the latest revision automatically updates the Asset Tag field.
- B. Flashing the BIOS to the latest revision automatically updates the Asset Tag field.
- C. You download the Asset Tag Utility from premiersupport.dell.com and use it to update the Asset Tag Field.
- D. You create the Asset Tag Utility Diskette from the DSA CD and use it to update the Asset Tag field.
- E. After installing Windows 2000, you use the Asset Manager application from the Dell group in control panel to update the Asset Tag field.
Answer: C,D
NEW QUESTION # 56
How do you gain access to the Utility Partition?
- A. reboot the server from the DSA CD
- B. press F2 during POST
- C. press F10 during POST
- D. press ALT-M during POST
Answer: C
NEW QUESTION # 57
Click the Exhibit button. In Red Hat Linux, which network command produces the o utput shown in the exhibit ?
- A. netconfig -r
- B. netstat -s
- C. ipconfig
- D. ifconfig -a
Answer: D
NEW QUESTION # 58
When you create a logical drive using the Create Volume Wizard, the logical drive size is prefilled on the Select Partition Type screen. What does this logical drive size indicate?
- A. the suggested logical drive size that should be created on that drive
- B. the logical drive size from the previously created logical drive
- C. the maximum logical drive size that can be created on that drive
- D. the minimum logical drive size that can be created on that drive
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 59
You need to create a supported driver diskette from the DSA . How do you put the DSA in service mode?
- A. boot the server from the Dell OpenManage IT Assistant CD
- B. boot the server from a floppy disk
- C. enter the command DSA.EXE /service at a command prompt
- D. insert the DSA CD into a server running a supported OS
Answer: D
NEW QUESTION # 60
The system administrator notices the Dell badge on the front of the server is flashing orange on the PowerEdge 2650. What utility should the system administrator load to determine the cause of the flashing diagnostic indicator?
- A. Dell Server Assistant
- B. OpenManage Array Manager
- C. OpenManage Server Administrator
- D. Dell Client Configuration Utility
Answer: C
NEW QUESTION # 61
You rename the administrator user name on a Windows Operating System to omsalogin and log in to OpenManage Server Administrator. Which two statements are true? (Choose two.)
- A. You can update the BIOS on this system.
- B. Since you renamed the administrator name, its security ID is changed. Now you cannot log in to Server Administrator.
- C. Since you renamed the administrator user name, you can log in to Server Administrator as normal user, but not as an administrator.
- D. You can launch the Summary page of Server Administrator and view the Operating System and BIOS versions you have installed on your system.
Answer: A,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 62
What are three ways you can flash the BIOS on a PowerEdge server? (Choose three.)
- A. using OMSA
- B. using Device Manager
- C. using DSA
- D. using a floppy diskette
- E. using ITA
Answer: A,D,E
NEW QUESTION # 63
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)
- A. You must do a custom installation to support Linux.
- B. You must purchase the Linux version of OMSA.
- C. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.
- D. The running kernel must have loadable module support enabled.
- E. You must be logged in as root.
Answer: C,D,E
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 64
You are monitoring 100 servers in your environment using ITA . You want to determine which servers are equipped with a remote access controller and the Array Manager agent, as well as view the physical memory of each server on one screen. How should you view this information from ITA?
- A. go to the ITA Logs tab, select the information you want to view, and click the Refresh button
- B. go to the ITA Search view, select all the information you want to view using one query, and click the Search button
- C. go to the ITA Inventory view, select the information you want to view, and click the Get Inventory button
- D. go to the ITA Remote Address Book, select the information you want to view, and click the Get Addresses button
Answer: C
NEW QUESTION # 65
A failed processor is removed on a quad processor system using slotted processors. The server displays video but the POST halts and displays a "processor or terminator card not installed" error. The removed processor was in the third slot. What is needed to allow the system to complete POST and boot the OS?
- A. install a terminator card in processor slot 3
- B. press F2 for system setup and disable processor 3 in the BIOS
- C. install the ISA_CLR jumper, go through POST, power off, and remove the jumper
- D. move the terminator card from processor slot 4 to processor slot 3
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 66
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?
- A. AFT
- B. SLB
- C. ATF
- D. ALB
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 67
Which benefit does Link Aggregation provide, as used by Intel NICs in PowerEdge servers?
- A. combines multiple adapters into one channel, providing greater bandwidth for network traffic
- B. assures that if one adapter fails, the server remains available to the network
- C. allows multiple adapters to share the network load, preventing one adapter from being overloaded
- D. provides load-balanced fault tolerance to the network
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 68
Which two components can be installed in the 0U space found in Dell racks? (Choose two)
- A. Dell UPS
- B. Dell flat panel monitor
- C. Dell Dual-Power Grid Switch
- D. Dell PDU
Answer: C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 69
How many DIMMs are required for the minimum memory configuration on a server with four-way interleaving memory addressing?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 70
Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server? (Choose three.)
- A. change the Asset Tag information
- B. enable the SCSI/RAID controller
- C. enable or disable all integrated devices in the system
- D. change the boot order
Answer: B,C,D
NEW QUESTION # 71
Why is memory interleaving used?
- A. to provide speed improvements by allowing addressing to be set for the next access to the same DIMM, while data are being read from the previous access
- B. to provide speed improvements by accessing memory in parallel
- C. to provide redundancy by maintaining parity information on the DRAM to detect and correct single bit errors
- D. to provide redundancy by allowing defective memory to be disabled
Answer: B
NEW QUESTION # 72
What type of security authentication scheme is used by OMSA under Windows 2000?
- A. NDS
- B. NTLM
- C. PAM
- D. SNMP
Answer: B
NEW QUESTION # 73
What does virtual disk refer to, as used in Dell Array Manager?
- A. array disks or array disk segments presented to the OS as a single continuous block of storage space
- B. a block of storage accessed by a drive letter
- C. contains the physical view of storage entities such as controllers, channels, and array disks
- D. a single array disk in an array of disks
Answer: A
NEW QUESTION # 74
Which two steps are part of configuring SNMP for OpenManage products on the managed node?
(Choose two.)
- A. configure a trap destination on systems relying on SNMP as their communication protocol
- B. configure SNMP community names
- C. configure the contact and location in the Agent tab of the SNMP service
- D. configure SNMP security for all community names to READ ONLY
Answer: A,B
NEW QUESTION # 75
A failed processor is removed on a quad processor system using slotted processors. The server displays video but the POST halts and displays a "processor or terminator card not installed" error. The removed processor was in the third slot. What is needed to allow the system to complete POST and boot the OS?
- A. install a terminator card in processor slot 3
- B. press F2 for system setup and disable processor 3 in the BIOS
- C. install the ISA_CLR jumper, go through POST, power off, and remove the jumper
- D. move the terminator card from processor slot 4 to processor slot 3
Answer: A
NEW QUESTION # 76
......
Real Dell DC0-200 Exam Dumps with Correct 120 Questions and Answers: https://www.dumpsreview.com/DC0-200-exam-dumps-review.html
