300-625 Exam Dumps, 300-625 Practice Test Questions
PDF (New 2021) Actual Cisco 300-625 Exam Questions
2. Implementation
Weightage – 35%
The second domain is an extensive one. It is focused on topics like the implementation of Fibre Channel port channels, Fibre Channel protocol services, Name service, and Cisco Fabric Services. It also checks the ability to implement FCoE, including FCoE Initialization Protocol. Besides, it also throws light on concepts like Priority flow control, Enhanced transmission selection, Data Center Bridging Exchange/Link Level Discovery Protocol. The configuration and implementation of VSAN extensions, and NPV and NPIV are involved in this module too.
Additional Resources
For impactful self-study regarding your 300-625 DCSAN exam, we would recommend the book “How I Passed Implementing Cisco Storage Area Networking Exam” [Kindle Edition]. Packed with some viable and result-oriented information, this guide by Rocismo Liolentz Publications will surely make the exam journey easy-to-accomplish. The material is available in English and is a great way to learn about effective methodologies.
4. MDS Troubleshooting
Weightage – 25%
The prime focus of the last exam section is on one’s knowledge of ways to perform effective troubleshooting of Fibre Channel domains, zoning, bug-fixing related to duplicate domain, and zone merge failure. Before this domain ends, it also explains how to troubleshoot the boot and upgrade problems.
NEW QUESTION 36
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0x8914
- B. 0x8906
- C. 0xxfc0e
- D. 0x8913
Answer: A
NEW QUESTION 37
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# fcsp esp manual
- B. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual - C. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
MDS(config-if-esp)# mode gem - D. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp mode gem
MDS(config-if-fcsp)# fcsp esp manual
Answer: C
NEW QUESTION 38
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. Aliases must be saved within a central database on the fabric.
- B. All aliases being used are being configured in the same VSAN.
- C. The zone database must be distributed over the fabric.
- D. The same alias must be used in zoning as well as DPVM.
Answer: C
Explanation:
Section: Implementation
NEW QUESTION 39
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)
- A. FCoE is already enabled on a Cisco MDS switch.
- B. The QoS policy must be identical to other Cisco FCoE switches in the network.
- C. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
- D. On the Cisco MDS, the MTU is set equal to 2112.
- E. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
Answer: A,B
NEW QUESTION 40
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated.
What caused the problem?
- A. The rcf-reject option is enabled on the interfaces.
- B. The autoreconfigure option is enabled on both switches.
- C. The rcf-reject option is disabled on the interfaces.
- D. The autoreconfigure option is disabled on both switches.
Answer: D
NEW QUESTION 41
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?
- A. The device alias is renamed and the add command is moved to the rejected list.
- B. The rename command is moved to the rejected list and the add command executes successfully.
- C. Both commands execute successfully.
- D. Both commands are moved to the rejected list.
Answer: C
Explanation:
Section: Implementation
NEW QUESTION 42
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?
- A. NTP must be configured on all devices or the configuration fails.
- B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
- C. All switches on the fabric must be configured for the same password.
- D. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
Answer: A
NEW QUESTION 43
Refer to the exhibit. A user who is logged in as an operator cannot update the zoneset.
What is the cause of this issue?
- A. The fabric is locked by admin on another switch.
- B. The switch has a conflicting domain ID.
- C. The fabric is locked by admin on switch-2.
- D. Hard zoning is enabled.
- E. Merge control is disabled.
Answer: C
NEW QUESTION 44
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. fabric controller
- B. time server
- C. name server
- D. management server
Answer: C
Explanation:
Section: Implementation
Explanation
NEW QUESTION 45
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)
- A. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
- B. FCoE is already enabled on a Cisco MDS switch.
- C. The QoS policy must be identical to other Cisco FCoE switches in the network.
- D. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
- E. On the Cisco MDS, the MTU is set equal to 2112.
Answer: A,C
NEW QUESTION 46
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits.
- A. Secure Unique Device Identifier
- B. UEFI Secure Boot
- C. BIOS Secure Boot
- D. Cisco Secure Boot
Answer: D
Explanation:
Section: Deployment
NEW QUESTION 47
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. NP
- B. E
- C. N
- D. F
Answer: A
NEW QUESTION 48
A storage network engineer is implementing a port channel for multiple FCIP interfaces with write acceleration in a client's storage network. Which channel mode must be used?
- A. passive
- B. force
- C. on
- D. active
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 49
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches.
The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
- C. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
- D. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
Answer: C
NEW QUESTION 50
Refer to the exhibit.
What is the result of merging the fabric?
- A. The merge is invalid.
- B. The merged fabric contains only service group Group1.
- C. The merged fabric has NAT enabled.
- D. The merged fabric IVR VSAN topology is set to activate.
Answer: B
NEW QUESTION 51
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. E
- B. N
- C. F
- D. NP
Answer: B
NEW QUESTION 52
Refer to the exhibit.
An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
- C. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
- D. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
Answer: C
NEW QUESTION 53
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The same alias must be used in zoning as well as DPVM
- B. All aliases being used are being configured in the same VSAN
- C. Aliases must be saved within a central database on the fabric
- D. The zone database must be distributed over the fabric
Answer: A
NEW QUESTION 54
Which configuration is always required when running the setup utility on a Cisco MDS 9000 Series Switch?
- A. administrator password
- B. management IP address
- C. active NTP server
- D. active default gateway
Answer: A
Explanation:
Section: Implementation
NEW QUESTION 55
......
Updated Nov-2021 Pass 300-625 Exam - Real Practice Test Questions: https://www.dumpsreview.com/300-625-exam-dumps-review.html
