[Jul 30, 2022] DumpsReview JN0-250 dumps & JNCIS-MistAI sure practice dumps
Juniper JN0-250 Actual Questions and Braindumps
Where I can take Juniper JN0-250 Certification Exam:
If you want to take this exam, then you can go to the Pearson VUE website and take the exam. You can also take the exam through your local authorized testing centers. These testing centers are usually available in major cities, but it is recommended that you check with them about the availability of the test in your city. If you are taking the exam through the Pearson VUE website, then you can take it from any place where there is an internet connection. JN0-250 exam dumps can help you to get informed about the required data.
What are the Pre-Requisite for the Juniper JN0-250 Certification Exam?
There are no prerequisites for the exam, but a candidate needs to possess some basic knowledge about the Juniper Networks products.
NEW QUESTION 21
You have discovered an access point that is connected to a corporate network, but it is not under the corporation's control.
In this scenario, what is this type of access point called?
- A. neighbor
- B. honeypot
- C. rogue
- D. air gap
Answer: C
NEW QUESTION 22
You have discovered an access point that is not connected to the corporate network but it broadcasts the corporation's SSID.
In this scenario, what is this type of access point called?
- A. neighbor
- B. honeypot
- C. rogue
- D. air gap
Answer: C
NEW QUESTION 23
What are three valid administrator roles that you would be able to assign to a user within an organization? (Choose three.)
- A. Network Admin
- B. Helpdesk
- C. Super User
- D. Root User
- E. View
Answer: C,D,E
NEW QUESTION 24
What are two characteristics of the 2.4 GHz band when compared to the 5 GHz band? (Choose two.)
- A. lower frequency
- B. less non-Wi-Fi interference
- C. more congestion
- D. shorter wavelength
Answer: A,B
NEW QUESTION 25
Which organization is responsible for certifying that products and technology satisfy Wi-Fi interoperability?
- A. IEEE
- B. ISO
- C. Wi-Fi Alliance
- D. IETF
Answer: C
NEW QUESTION 26
You configured an 802.11n AP to use the 2.4 GHz frequency band and 20 MHz channel width.
In this scenario, how many non-overlapping channels are available for clients to use in Europe?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 27
Users are complaining about WLAN performance and the Mist dashboard reports non-Wi-Fi interference.
Which diagnostics tool would you use to further investigate this issue on-site and determine the location of the interference?
- A. protocol analyzer
- B. WLAN scanner
- C. spectrum analyzer
- D. wireless design software
Answer: C
NEW QUESTION 28
You have just brought online a new site of AP43s. While verifying that everything looks good, you notice that all of the access points (APs) are reporting "insufficient power." The APs are connected to an 802. 3at-capable switch.
In this scenario, what would be the cause of the error?
- A. The Ethernet cable is plugged into the wrong port on the AP.
- B. The cable run to each AP is too long.
- C. The APs' firmware must be upgraded.
- D. LLDP-MED is not configured on the switch.
Answer: C
NEW QUESTION 29
Marvis requires which subscription?
- A. Premium Analytics
- B. Wired Assurance
- C. Virtual Network Assistant
- D. Asset Visibility
Answer: C
NEW QUESTION 30
Which Mist feature offers Al-based interactive troubleshooting?
- A. Insights
- B. Marvis
- C. Site Configuration
- D. Wireless Assurance
Answer: B
NEW QUESTION 31
You are troubleshooting a signal strength issue when you notice that the signal strength changes from -70 to -73 dBm as you move from one room to another.
In this scenario, what is happening?
- A. Signal strength has increased by 10x.
- B. Signal strength has doubled.
- C. Signal strength has decreased by 10x.
- D. Signal strength has halved.
Answer: C
NEW QUESTION 32
Which two statements are correct about Marvis? (Choose two.)
- A. Marvis lets you ask questions about your network.
- B. Marvis is the main configuration tool.
- C. Marvis can be used as a proactive monitoring tool.
- D. Marvis will send custom reports.
Answer: A,C
NEW QUESTION 33
What are two requirements to connect an AP to the Mist Cloud? (Choose two.)
- A. You need a DHCP server
- B. You need a CA SSL certificate.
- C. You need DNS resolution.
- D. You need a static IP address.
Answer: C,D
NEW QUESTION 34
You are configuring your Mist network and you want to separate certain users into their own networks and VLANs. You are concerned about the network's utilization and want to make sure that only a single SSID is sending beacons.
In this scenario, which feature would accomplish this behavior?
- A. SSID scheduling
- B. multiple PSK
- C. virtual SSID
- D. geofence
Answer: A
NEW QUESTION 35
Which organization is responsible for WLAN standards?
- A. ISO
- B. IEEE
- C. IETF
- D. FCC
Answer: B
NEW QUESTION 36
Which statement is correct about the Mist API?
- A. You need one AP connected to use the Mist API.
- B. The Mist API requires calling support for access.
- C. The Mist API is part of the basic subscription.
- D. Proprietary tools are required to use the Mist API.
Answer: D
NEW QUESTION 37
Which device is responsible for roaming decisions?
- A. AP
- B. user
- C. controller
- D. client
Answer: D
NEW QUESTION 38
Which statement is correct about 802.11 wireless network interfaces?
- A. A wireless NIC only receives frames destined for it.
- B. Wireless NICs operate in full-duplex mode.
- C. Wireless NICs process all frames that are heard.
- D. Wireless NICs use Carrier Sense Multiple Access Collision Detection.
Answer: D
NEW QUESTION 39
Which statement is correct about Wi-Fi?
- A. A user device can be connected on multiple frequency bands at the same time.
- B. Wi-Fi operates at full-multiplex.
- C. Wi-Fi operates at half-duplex.
- D. Only two devices can transmit on the same channel at the same time.
Answer: C
NEW QUESTION 40 
Referring to the exhibit, what do you determine about the site's Time to Connect SLE metric?
- A. Eighty percent of the Time to Connect failures are related to DHCP failures
- B. Successful connect averaged 1.6 seconds.
- C. Time to Connect Association DHCP failures impacted 80% of users.
- D. All clients cannot connect to the Internet.
Answer: B
NEW QUESTION 41
Which two statements about the Mist UI are true? (Choose two.)
- A. It can initiate a BLE packet capture.
- B. It can initiate a packet capture on cloud uplink.
- C. It can initiate a wireless packet capture.
- D. It can initiate a wired packet capture.
Answer: C,D
NEW QUESTION 42
......
Juniper JN0-250 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Latest JN0-250 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://www.dumpsreview.com/JN0-250-exam-dumps-review.html
