Prepare 350-601 Question Answers - 350-601 Exam Dumps [Q203-Q219]

Prepare 350-601 Question Answers - 350-601 Exam Dumps

Real Cisco 350-601 Exam Questions [Updated 2023]

NEW QUESTION 203
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established?

A. Option D
B. Option B
C. Option A
D. Option C

Answer: B

NEW QUESTION 204
When the default firmware package is set to a new version, which type of policy determines the liming of server reboots during the firmware upgrade?

A. maintenance
B. diagnostics
C. BIOS
D. local disk

Answer: A

Explanation:
Section: Compute
Explanation/Reference:

NEW QUESTION 205
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

A. switch(config-vsan-db># vsan 100 fc 3/1
B. switch(config-vsan-cb># vsan 100 bind interface fc 3/1
C. switch<config-vsan-db)# vsan 100 bind interface vfc 31
D. switch(config-vsan-db)# vsan 100 interface vfc 31

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/vsan.html

NEW QUESTION 206
An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down. Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.

Answer:

Explanation:

Explanation
Text Description automatically generated

NEW QUESTION 207
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?

A. Option D
B. Option A
C. Option C
D. Option B

Answer: C

NEW QUESTION 208
A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2. Which two configuration sets must be used to meet these requirements? (Choose two.)

A. Option D
B. Option A
C. Option C
D. Option E
E. Option B

Answer: A,C

Explanation:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/ configuration/guide/sm_nx_os_cli/sm_2cfs.html

NEW QUESTION 209
A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch. Which configuration set should be applied to complete this task?

A. Option D
B. Option A
C. Option C
D. Option B

Answer: C

Explanation:
Explanation
The command write memory is not valid in NX-OS
The "event-default"

NEW QUESTION 210
Refer to the exhibit.

A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?

A. 192.168.254.4
B. 192.168.254.1
C. 192.168.254.2
D. 239.255.70.83

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/interfaces/92x/b-cisco-nexus-3000-nx

NEW QUESTION 211
A network engineer must configure FCoE on an interface of a cisco MDS 9000 series switch. It should be used for mapping between Vlan 600 and Vsan 6. Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.

Answer:

Explanation:

Explanation
fcoe vsan 6
allowed vlan 1,600
vsan 6 interface vfc 6

NEW QUESTION 212
An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?

A. The system defaults to the backup image version
B. The system defaults to and boots into GOLD firmware image
C. The system defaults to and boots into kickstart image
D. The system defaults to the GOLD firmware image

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware- Mgmt/4-0/ b_UCSM_CLI_Firmware_Management_Guide_4-0/ b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_011.html

NEW QUESTION 213
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68. Which command set creates this certificate request?
A)

B)

C)

D)

A. Option D
B. Option A
C. Option C
D. Option B

Answer: C

Explanation:
Explanation

NEW QUESTION 214
Refer to the exhibit.

Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

A. IPv4 multicast address
B. IPv4 anycast address
C. IPv4 unicast address
D. IPv4 gateway address

Answer: A

Explanation:

NEW QUESTION 215
What is a characteristic of the install all command on the cisco Nexus series switch?

A. Upgrades only certain modules
B. Continues the upgrade process if any step in the sequence fails
C. Impact data plan traffic
D. Automatically checks the image integrity

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/ b_Cisco_Nexus_9000_Series_NXOS_ Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html install all command automatically checks the image integrity, which includes the NXOS software image. The command performs a platform validity check to verify that a wrong image is not used. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/upgrade/7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x_newGuide_chapter_01.html

NEW QUESTION 216
Refer to the exhibit.

Which setting must be configured to prevent the reuse of passwords?

A. History Count
B. Change Interval
C. Change Count
D. No Change Interval

Answer: A

Explanation:
Section: Security
Explanation/Reference:

NEW QUESTION 217
Refer to the exhibit.

A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device. Which command completes the script?