Verified 350-601 dumps Q&As - Pass Guarantee Exam Dumps Test Engine [2024]
350-601 dumps and 455 unique questions
If you are an IT professional looking to advance your career in data center technologies, the Cisco 350-601 exam is an essential certification to have. 350-601 exam validates your knowledge and skills in implementing and managing complex data center infrastructures, making you highly competitive in the job market. So, start preparing for the exam today and take the first step towards a successful career in data center technologies.
Cisco 350-601 exam is intended primarily for data center professionals, including network administrators, network engineers, systems administrators, and data center architects. 350-601 exam is designed to test the candidate's ability to implement and manage data center technologies, including virtualization, automation, and network security. 350-601 exam consists of multiple choice questions, simulations, and drag-and-drop questions, and candidates have 120 minutes to complete the exam.
NEW QUESTION # 187
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
Explanation:
NEW QUESTION # 188
Refer to the exhibit.
A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server. Which configuration must be added on the remote OTV AEDs site?
- A. interface Overlay200
otv join-interface Ethernet1/2
otv extend-vlan 178, 2500-2563 - B. interface Overlay200
otv join-interface Ethernet1/2
otv extend-vlan 178, 2500-2563
otv use-adjacency-server 20.1.1.1 20.2.1.1 unicast-only - C. interface Overlay200
otv join-interface Ethernet1/2
otv extend-vlan 178, 2500-2563
otv use-adjacency-server 20.1.1.1 unicast-only - D. interface Overlay200
otv join-interface Ethernet1/2
otv extand-vlan 178, 2500-2563
otv adjacency-server unicast-only
Answer: B
NEW QUESTION # 189
A DNS server with IP address 192.168.1.1 is deployed in a data center A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS. Which configuration should be applied?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-3-1/b_CLI_Config_Guide_1_3_1/CLI_Config_Guide_1_3_1_chapter11.pdf
NEW QUESTION # 190
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
NEW QUESTION # 191
An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down. Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.
Answer:
Explanation:
NEW QUESTION # 192
An engineer is implementing a Cisco UCS system with directly connected Fibre channel storage array. Which two actions should be taken to accomplish this task? (Choose two.)
- A. Configure a storage connection policy
- B. Create a new vHBA that is dedicated to the array
- C. Configure a new VSAN
- D. Configure a Fibre Channel port channel
- E. Configure the Fibre Channel port as a Fibre channel storage port
Answer: C,E
NEW QUESTION # 193
Refer to the exhibit.
An engineer must monitor all LAN traffic on Fabric A from a blade server. Which source should be configured in the test-span monitor session to complete this task?
- A. all uplink FCoE ports
- B. all vNICs from the service profile that correspond to this server
- C. all vHBAs from the service profile that correspond to this server
- D. all uplink Ethernet ports
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter45.html
NEW QUESTION # 194
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-1 preempts N7K-2 as the STP root.
- B. N7K-1 appears as the STP root.
- C. N7K-1 and N7K-2 appear as a single STP root.
- D. N7K-2 appears as the STP root.
Answer: C
NEW QUESTION # 195 
Refer to the exhibit. An engineer must implement VXIAN with anycast gateway. To accomplish this, an engineer must set up PIM Source-Specific Multicast for host reachability. Which IP address must be applied to interface loopback1 to accomplish this goal?
- A. 10.10.0.1/32
- B. 255.0.100
- C. 10.10.0.2/32
- D. 255.0.0.1/8
Answer: B
NEW QUESTION # 196
Refer to the exhibit.
Which statement about the default gateway configuration of the vPC is true?
- A. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
- B. N7K-1 acts as the default gateway for all traffic.
- C. N7K-2 acts as the default gateway for all traffic.
- D. Either switch can act as the active default gateway.
Answer: D
NEW QUESTION # 197
Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card. The switch is configured with an Advanced Services license. Which two actions delete secured MAC addresses from the interface? (Choose Two)
- A. Shutdown and then no shutdown must be run on the interface.
- B. The address must be removed from the configuration.
- C. The device must be restarted manually.
- D. The address must reach the age limit that is configured for the interface.
- E. The interface must be converted to a routed port.
Answer: B,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/security/configuration/guide/b_Cisco_N
NEW QUESTION # 198
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
* vNIC and vHBA profiles
* Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
- A. facility-manager
- B. server-equipment
- C. server-profile
- D. operations
- E. server-compute
Answer: B,E
NEW QUESTION # 199
An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the NX-OS?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 200
An engineer must configure Cisco UCS Manager to accept only HTTPS connections that use TLS 1 2 The cipher security level must be high and the length of the keyring key value must be 2048 bits Drag and drop the code snippets from the right onto the blanks in the code on the left to accomplish these goals Not all commands are used
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 201
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.
Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Answer:
Explanation:
NEW QUESTION # 202
A customer wants to offload some of its order processing to a public cloud environment. The customer environment is based on Cisco ACI and uses Puppet with containenzed applications. The operations team requires a solution to orchestrate and optimize the cost of the new solution. Which product must be used to meet these requirements?
- A. Cisco Intersight
- B. Cisco Data Center Network Manager
- C. Cisco CloudCenter
- D. Cisco Workload Optimization Manager
Answer: C
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/cloud-systems-management/cloudcenter/white-paper-c11-737224.pdf
- Enforce multicloud governance by guiding user decisions to reduce risk
- Securely automate deployment to reduce manual effort and get consistent results
- Increase feature velocity via integration with developer tools to accelerate time to market (CI/CD = Puppet, Chef, and Ansible).
- Optimize cloud consumption to cut pay-per-use cloud costs
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/cloudcenter-suite/datasheet-c78-741886.html
NEW QUESTION # 203
An engineer must recover the Cisco UCS system The full backup is available on a backup SCP server Which set of actions recovers the configuration of the Cisco UCS Manager?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 204
An engineer configures the properties of a cisco UCS cisco integrated Management controller network adapter for a standalone cisco C-Series server. The Fallback Timeout in the vNIC was set to 600. When the failure occurs. The secondary must be used and then fallback when the primary interface becomes available again.
Which action be taken to meet these requirements?
- A. Disable VNTAG mode.
- B. Increase Cos to 6.
- C. Set default VLAN on the adapters.
- D. Enable Uplink failover.
Answer: D
Explanation:
Explanation
Enable Uplink Failover check box - Check this box if traffic on this vNIC should fail over to the secondary interface if there are communication problems. VNTAG mode is required for this option.
Failback timeout field - After a vNIC has started using its secondary interface, this setting controls how long the primary interface must be available before the system resumes using the primary interface for the vNIC.
Enter a number of seconds between 0 and 600. VNTAG mode is required for this option.
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_G
NEW QUESTION # 205
An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment. Which two roles can be used to configure LAN Connectivity policies? (Choose two.)
- A. operations
- B. server-profile
- C. admin
- D. network-admin
- E. enable
Answer: B,D
NEW QUESTION # 206
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. all configuration
- B. system configuration
- C. full state
- D. logical configuration
Answer: C
NEW QUESTION # 207
......
350-601 Dumps for Pass Guaranteed - Pass 350-601 Exam: https://www.dumpsreview.com/350-601-exam-dumps-review.html
350-601 Exam Dumps - Try Best 350-601 Exam Questions: https://drive.google.com/open?id=1YZcE3UUWpNvC83Xtzi1De_GfV77mVkw0
