[Q57-Q74] 350-601 Free Update With 100% Exam Passing Guarantee [2021]

350-601 Free Update With 100% Exam Passing Guarantee [2021]

[Oct-2021] Verified Cisco Exam Dumps with 350-601 Exam Study Guide

NEW QUESTION 57
Refer to the exhibit.

What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?

A. displays the compatibility of the EPLD upgrade and the image in the bootflash
B. displays the impact of the upgrade on the operation of the switch
C. shows a simulated upgrade of the EPLD
D. upgrades the EPLD on the switch disruptively

Answer: A

Explanation:
Explanation

NEW QUESTION 58
Refer to the exhibit.

An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?

A. POST to aaaRefresh
B. POST to aaaLogin
C. POST to aaaLogout
D. GET to aaaListDomains

Answer: B

Explanation:
Explanation

NEW QUESTION 59
Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Answer:

Explanation:

Explanation
10.10.32.121/29 ,
10.10.32.122,
point-to-point ,
sparse-mode

NEW QUESTION 60
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.

Answer:

Explanation:

NEW QUESTION 61
Refer to the exhibit.

A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server.
Which configuration must be added on the remote OTV AEDs site?

A. Option D
B. Option C
C. Option A
D. Option B

Answer: B

NEW QUESTION 62
What is an advantage of using Ansible for automation as compared to Puppet and Chef?

A. Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems.
B. Ansible performs automation without installing a software agent on the target node.
C. Ansible automates the enforcement of configuration settings.
D. Ansible configures a set of CLI commands on a device by using NETCONF.

Answer: B

NEW QUESTION 63
Refer to the exhibit.

What is the result of implementing this configuration?

A. The switch queries the TACACS+ server by using a clear text PAP login.
B. The TACACS+ server uses the type-6 encrypted format.
C. The timeout value on the TACACS+ server is 10 seconds.
D. The switch queries the TACACS+ server by using an encrypted text PAP login.

Answer: C

Explanation:
Section: Security

NEW QUESTION 64
Which data interchange format is presented in this output?

A. YAML
B. CSS
C. JSON
D. XML

Answer: C

NEW QUESTION 65
Refer to the exhibit.

The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

A. N7K-1 preempts N7K-2 as the STP root.
B. N7K-2 appears as the STP root.
C. N7K-1 and N7K-2 appear as a single STP root.
D. N7K-1 appears as the STP root.

Answer: C

NEW QUESTION 66
Refer to the exhibit.

Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?

A. Verify the DHCP snooping bindings.
B. Configure the interface of the DHCP server as untrusted.
C. Configure the IP address of the DHCP server.
D. Enable the DHCP relay agent.

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_0/dcnm/security/configuration/guide/sec_dcnm

NEW QUESTION 67
Which server policy is used to install new Cisco IMC software on a server?

A. Cisco IMC software policy
B. BIOS software policy
C. hypervisor firmware policy
D. host firmware policy

Answer: D

NEW QUESTION 68
Which two configuration settings are available in the in the cisco UCS flmware Auto sync server policy?

A. User Acknowledge
B. No Action
C. User Notification
D. Delayed Action
E. Immediate Action

Answer: A,B

NEW QUESTION 69
Refer to the exhibit.

What is the result of implementing this configuration?

A. The switch queries the TACACS+ server by using an encrypted text PAP login.
B. The switch queries the TACACS+ server by using a clear text PAP login.
C. The TACACS+ server uses the type-6 encrypted format.
D. The timeout value on the TACACS+ server is 10 seconds.

Answer: A

NEW QUESTION 70
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.
Which method does Cisco recommend to configure the SAN boot?

A. Define the vHBAs as bootable and leave the boot target definition empty.
B. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
C. Create a SAN boot policy in which every initiator is mapped to the same target LUN.
D. Define the vHBAs as bootable and leave the default values on the boot target definition.

Answer: C

NEW QUESTION 71
An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned?
(Choose two)

A. commit
B. write
C. checkpoint
D. verify
E. apply

Answer: A,D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuratio

NEW QUESTION 72
An engineer deploys a custom guest shell rootfs onto multiple switches.
Drag and drop the steps from the left into the correct order on the right.
Export the Guest Shell rootfs.